![]() If you’re hanging something heavier, like a bookshelf or some shelves, then you’ll need to use anchoring bolts.įor this, you’ll also need a masonry bit for drilling holes into the plaster wall and some expanding anchors for added security. You’ll need a masonry bit for the pilot hole, a hammer drill for drilling into tough material like concrete, and a screwdriver for tightening the anchor into the wall. Anchorsįor heavier items up to around 25 pounds, use hollow wall anchors. It’s challenging to hang large objects on lath and plaster walls, and you’ll need specialized equipment to do it securely and safely. If any part of the process feels too difficult or complicated (or dangerous! ), don’t hesitate to call in an expert for help.įollowing these safety guidelines will ensure that your project is completed safely and securely, with no risks! Fastening Heavy Items to Lath and Plaster Walls Wear protective gear like gloves and goggles throughout the hanging process to protect yourself from stray screws or power tools.Ensure stability by using screws that will fix securely into the wall and stay in place.Measure twice to make sure that the wall can support the weight of the item you want to hang.So to make sure you’re safe and secure, it’s important to follow some basic safety tips before you start. ![]() Hanging heavy items on lath and plaster walls is a tricky task done incorrectly, it can damage your walls and fixtures, or worse, put you at risk for injury. Now that you have everything you need, it’s time to get started! Safety Guidelines for Hanging Heavy Items You’ll also need wall anchors or toggle bolts, lag screws with washers for attaching lag shields to your wall, and toggle bolts for heavier items.įinally, don’t forget the basics: a hammer, screwdriver, and measuring tape will come in handy too. You’ll need a stud finder to locate the studs in your wall, as well as a drill with a masonry bit for making holes in your lath and plaster walls. Hanging heavy items on lath and plaster walls can involve a bit of extra work, but the results are worth it.īefore you start, you’ll need to make sure you have the right materials and hand tools for the job. Get rid of any stuck chunks of plaster by knocking them free of the lath with a hammer or scraping tool.8.3 What’s the best way to hang heavy objects on lath and plaster walls? Tools and Materials Needed to Hang Heavy Things on Lath and Plaster Walls Be careful because this will likely result in a messier cleanup. ![]() If your wall contains horsehair plaster, it’s likely very old so the wall could crumble easily. You’ll want to take apart the plaster and lath separately for easier cleanup. Make sure not to destroy the lath during this step. Some plaster might stick to the lath, but try to expose as much of the wood framework as possible. Use a shovel to scrape off chunks of plaster. If you’re having trouble listening for studs, you can buy a wall scanner to make your work easier. Then, use the hammer to poke holes in the parts of the plaster that aren’t supported by studs. If it sounds hollow, you are moving away from a stud. If the tapping sound is solid, then you're approaching a stud. Listen for the wall studs - the vertical wooden beams in the wall - by lightly knocking on the wall with a hammer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |